Motor WP 125cc shaft Ø25mm
Hydrokit Part Number : MHP125A1AW
Technical information
White Danfoss WP 155 Medium-speed motor
Capacity: 125 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm center distance
25 mm diameter cylindrical shaft
Offset side holes Ø G ½
Drain hole Ø G 1/4
Black paint
continuous :
- Max Flow: 60 L/Min - Max Speed 559 rpm
- Delta pressure: 160 bar
- Torque: 258 N.m
Intermittent:
- Maximum flow: 75 L/Min - Maximum speed 599 rpm
- Delta pressure: 175 bar
- Torque: 213 N.m
Danfoss : 11200449 - 11199479 - 155125A6312BAAAA
Capacity: 125 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm center distance
25 mm diameter cylindrical shaft
Offset side holes Ø G ½
Drain hole Ø G 1/4
Black paint
continuous :
- Max Flow: 60 L/Min - Max Speed 559 rpm
- Delta pressure: 160 bar
- Torque: 258 N.m
Intermittent:
- Maximum flow: 75 L/Min - Maximum speed 599 rpm
- Delta pressure: 175 bar
- Torque: 213 N.m
Danfoss : 11200449 - 11199479 - 155125A6312BAAAA
Technical data
| Motor type | WP |  |
|
| Displacement | 125 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |