Motor WP 303cc shaft Ø25mm
Hydrokit Part Number : MHP315A1AW
Technical information
White Danfoss WP 155 Medium-speed motor
Capacity: 303 ccm
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm center distance
25 mm diameter cylindrical shaft
Offset side holes Ø G ½
Drain hole Ø G 1/4
Black paint
continuous :
- Maximum flow: 60 L / Min - Maximum speed 228 rpm
- Delta pressure: 120 bar
- Torque: 460 N.m
Intermittent:
- Max flow: 75L / Min - Max speed 245 rpm
- Delta pressure: 160 bar
- Torque: 602 N.m
Danfoss : 11200470 - 11199513 - 155315A6312BAAAA
Capacity: 303 ccm
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm center distance
25 mm diameter cylindrical shaft
Offset side holes Ø G ½
Drain hole Ø G 1/4
Black paint
continuous :
- Maximum flow: 60 L / Min - Maximum speed 228 rpm
- Delta pressure: 120 bar
- Torque: 460 N.m
Intermittent:
- Max flow: 75L / Min - Max speed 245 rpm
- Delta pressure: 160 bar
- Torque: 602 N.m
Danfoss : 11200470 - 11199513 - 155315A6312BAAAA
Technical data
| Motor type | WP |  |
|
| Displacement | 303 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |