Motor WR 320cc shaft Ø25mm
Hydrokit Part Number : MHR320A1AW
Technical information
White Drive Danfoss Medium-speed motor WR255
- Displacement: 322cm3
- Flange: 2-hole, distance 106.4mm, Ø centring 82.50mm
- Shaft: Ø 25mm, cylindrical, parallel key A8x7x32
- Ports: 1/2'' BSP (inlet and outlet) 1/4'' BSP (drain)
- Black paint
Continuous :
- Maximum flow: 61L / Min - Maximum speed 188 rpm
- Delta pressure: 121 bar
- Torque: 518 N.m
Intermittent:
- Max flow: 76L / Min - Max speed 235 rpm
- Delta pressure: 172 bar
- Torque: 690 N.m
Danfoss : 11200531 - 11199646 - 255320A6312BAAAA
- Displacement: 322cm3
- Flange: 2-hole, distance 106.4mm, Ø centring 82.50mm
- Shaft: Ø 25mm, cylindrical, parallel key A8x7x32
- Ports: 1/2'' BSP (inlet and outlet) 1/4'' BSP (drain)
- Black paint
Continuous :
- Maximum flow: 61L / Min - Maximum speed 188 rpm
- Delta pressure: 121 bar
- Torque: 518 N.m
Intermittent:
- Max flow: 76L / Min - Max speed 235 rpm
- Delta pressure: 172 bar
- Torque: 690 N.m
Danfoss : 11200531 - 11199646 - 255320A6312BAAAA
Technical data
| Motor type | WR |  |
|
| Displacement | 322 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |