Motor WR 40cc shaft Ø25mm
Hydrokit Part Number : MHR040A1AW
Technical information
White Danfoss WR 255 Medium-speed motor
Capacity: 40 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm centre distance
25 mm diameter cylindrical shaft
Offset side holes Ø BSP ½
Drain hole Ø BSP 1/4
Black paint
Danfoss: 11199533 - 255040A6312BAAAA
Capacity: 40 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm centre distance
25 mm diameter cylindrical shaft
Offset side holes Ø BSP ½
Drain hole Ø BSP 1/4
Black paint
Danfoss: 11199533 - 255040A6312BAAAA
Technical data
| Motor type | WR |  |
|
| Displacement | 40 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |