Motor WR 50cc shaft Ø25mm
Hydrokit Part Number : MHR050A1AW
Technical information
White Danfoss WR 255 Medium-speed motor
Capacity: 50 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm centre distance
25 mm diameter cylindrical shaft
Offset side holes Ø BSP ½
Drain hole Ø BSP 1/4
Black paint
continuous :
- Maximum flow: 53L / Min - Maximum speed 1058 rpm
- Delta pressure: 155 bar
- Torque: 111 N.m
Intermittent:
- Max Flow: 61L / Min - Max Speed 1220rpm
- Delta pressure: 207 bar
- Torque: 149 N.m
Danfoss: 11200495 - 11199537 - 255050A6312BAAAA
Capacity: 50 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm centre distance
25 mm diameter cylindrical shaft
Offset side holes Ø BSP ½
Drain hole Ø BSP 1/4
Black paint
continuous :
- Maximum flow: 53L / Min - Maximum speed 1058 rpm
- Delta pressure: 155 bar
- Torque: 111 N.m
Intermittent:
- Max Flow: 61L / Min - Max Speed 1220rpm
- Delta pressure: 207 bar
- Torque: 149 N.m
Danfoss: 11200495 - 11199537 - 255050A6312BAAAA
Technical data
| Motor type | WR |  |
|
| Displacement | 50 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |