MOTOR OMR X 315CC SHAFT 25 MM DIA
Hydrokit Part Number : MHP050A1AB
Technical information
Danfoss medium speed motor
Danfoss reference number 11186652
Capacity : 315 cm3
Front flange 2 bolt SAE A. Centre ring 82.5mm.
Cylindrical shaft diameter 25mm.
Offset side ports 1/2" BSP.
Standard dust seal.
Max pressure on shaft seal = 225 bar.
Front bearing : Fluid bearing.
Rear Bearing : Fluid bearing.
Integrated drainage valves.
Key : 8 x 7 x 32mm (Din 6885.)
Danfoss reference number 11186652
Capacity : 315 cm3
Front flange 2 bolt SAE A. Centre ring 82.5mm.
Cylindrical shaft diameter 25mm.
Offset side ports 1/2" BSP.
Standard dust seal.
Max pressure on shaft seal = 225 bar.
Front bearing : Fluid bearing.
Rear Bearing : Fluid bearing.
Integrated drainage valves.
Key : 8 x 7 x 32mm (Din 6885.)
Technical data
| Motor type | OMP Gerotor |  |
|
| Displacement | 50 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Marque | Autre |  |