MOTOR OMR X 80 SHAFT 25MM DIA
Hydrokit Part Number : MHR080A1AX
Technical information
Danfoss medium speed motor type OMR X
Danfoss reference : 11186671
Capacity : 80 cm3
2 bolt flange SAE A. Centering 82.5 mm
Cylindrical shaft 25mm dia
Offset side ports G 1/2"
Drain size G 1/4"
Standard dust seal
Max pressure on shaft seal = 225 bar
Front & rear bearing = fluid bearings
Integrated drain
Key A8 x 7 x 32 (DIN 6885)
Danfoss reference : 11186671
Capacity : 80 cm3
2 bolt flange SAE A. Centering 82.5 mm
Cylindrical shaft 25mm dia
Offset side ports G 1/2"
Drain size G 1/4"
Standard dust seal
Max pressure on shaft seal = 225 bar
Front & rear bearing = fluid bearings
Integrated drain
Key A8 x 7 x 32 (DIN 6885)
Technical data
| Motor type | OMR Geroller |  |
|
| Displacement | 80 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |