MOTOR OMRX 160CC 5 SPLINE SAE6B
Hydrokit Part Number : MHR160ACAX
Technical information
Danfoss semi-fast motor type OMR X
Danfoss reference: 11185570
Displacement: 160 cm3
2-hole SAEA flange - 82.5 mm centering
6-tooth splined shaft, 1 inch diameter
Offset side ports Ø G 1/2
Drain size: G 1/4
Standard dust seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drain valves
Danfoss reference: 11185570
Displacement: 160 cm3
2-hole SAEA flange - 82.5 mm centering
6-tooth splined shaft, 1 inch diameter
Offset side ports Ø G 1/2
Drain size: G 1/4
Standard dust seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drain valves
Technical data
| Motor type | OMR Geroller |  |
|
| Displacement | 160 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Splined |  |
|
| Size of the shaft | 6 dents PTO SAE6B Ø25.4 | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |