White/Danfoss Motor Typ OMS 160cc, zyl. Welle 32mm, 4 Loch-Frontflansch 106,8mm, Anschlüsse M22x150
Artikel-Nr Rau Serta : MHS160A3BD
Technische Informationen
Hydraulikmotor orig. Danfoss 160 cm³
151F0203 151/F0503
Welle: Ø32
151F0203 151/F0503
Welle: Ø32
These engines are perfect for long periods of operation under tough conditions (e.g. high pressure, slow speed, very light oils, frequent switches) The tapered roller bearings allows the absorption of static and dynamic radial loads. The distribution disc with a balancing plate is drived by a separated cardan shaft and it minimizes the hydraulic and mechanical losses. As a result, the efficiency is considerable even under high pressures.
Speed : max 600 to 810 RPM according to the engine
Cubic capacity : 80 to 400 cm³/rev
Ports 1/2 BSP
Shaft diameter 32 mm
technische Daten
Type Moteur | OMS | ||
Hubraum | 160 | cm³/tr | |
Type de flasque | Flasque 4 trous - centrage Ø82.5mm | ||
Art der Antriebswelle | Zylindrisch | ||
Taille de l'arbre | 32 mm | ||
Position des orifices | Orifices décalés | ||
Taille des orifices A et B | G1/2 | ||
Taille du drain | G1/4 | ||
Joint d'arbre | Joint 225 bar | ||
Type de roulement | Roulement à rouleaux conique | ||
Capteur de vitesse (prédisposition) | Non | ||
Peinture | Non peint | ||
Marke | Danfoss / White WDMS |