White/Danfoss Motor OMT 400cc, zyl. Welle 40mm,4 Loch-Frontflansch Ø125, Anschlüsse G3/4",151B3004
Artikel-Nr Rau Serta : MHT400A5
Technische Informationen
Hydraulikmotor orig. Danfoss (MHT400)
- Hubraum 410,9 ccm
- max. Drehzahl 305 U/min
- max. Drehmoment 1080 NM
- max. Leistung 30KW
- max. Druck 180 bar
- max. Öldurchfluss 125 L/min
- zylindrische Welle 40mm
- versetzte Hydraulikanschlüsse G3/4"BSP
Danfoss ref151B3004
- Hubraum 410,9 ccm
- max. Drehzahl 305 U/min
- max. Drehmoment 1080 NM
- max. Leistung 30KW
- max. Druck 180 bar
- max. Öldurchfluss 125 L/min
- zylindrische Welle 40mm
- versetzte Hydraulikanschlüsse G3/4"BSP
Danfoss ref151B3004
These engines are perfect for long periods of operation under tough conditions (e.g. high pressure, slow speed, very light oils, frequent switches) The tapered roller bearings allows the absorption of static and dynamic radial loads. The distribution disc with a balancing plate is drived by a separated cardan shaft and it minimizes the hydraulic and mechanical losses. As a result, the efficiency is considerable even under high pressures. Ports 3/4 BSP
Shaft diameter 40 mm
Max continuous inlet pressure 210 bar
Speed (rpm) | Torque (Nm) | ||||||||
Displacement (cm³) | max continuous | min | max continuous | start min | max continuous power (kW) | max continuous drop of pressure (bar) | max continuous oil flow (l/mn) | Sauer danfoss reference | Hydrokit reference |
161,1 | 625 | 10 | 470 | 340 | 26,5 | 200 | 100 | 151B3000 | MHT160A5 |
201,4 | 625 | 9 | 590 | 430 | 33,5 | 200 | 125 | 151B3001 | MHT200A5 |
251,8 | 500 | 8 | 730 | 530 | 33,5 | 200 | 125 | 151B3002 | MHT250A5 |
326,3 | 380 | 7 | 950 | 740 | 33,5 | 200 | 125 | 151B3003 | MHT315A5 |
410,9 | 305 | 6 | 1080 | 840 | 30 | 180 | 125 | 151B3004 | MHT400A5 |
532,6 | 240 | 5 | 1220 | 950 | 26,5 | 160 | 125 | 151B3005 | MHT500A5 |
161,1 | 625 | 10 | 470 | 340 | 26,5 | 200 | 100 | 151B3018 | MHT160C4 |
201,4 | 625 | 9 | 590 | 430 | 33,5 | 200 | 125 | 151B3019 | MHT200C4 |
technische Daten
Type Moteur | OMT | ||
Hubraum | 400 | cm³/tr | |
Type de flasque | Flasque 4 trous - centrage Ø125mm | ||
Art der Antriebswelle | Zylindrisch | ||
Taille de l'arbre | 40 mm | ||
Position des orifices | Orifices décalés | ||
Taille des orifices A et B | G3/4 | ||
Taille du drain | G1/4 | ||
Type de roulement | Roulement à rouleaux conique | ||
Capteur de vitesse (prédisposition) | Non | ||
Peinture | Non peint | ||
Marke | Danfoss |