Additional info Monobloc hydraulic valve with manual control • Maximum flow 80 L / min • 1 double-acting function • Maximum pressure 250 Bar • Pressure relief valve adjustable from 50 to 250 Bar • Pressure implantation in 1/2 G • 3/4 G return layout • Layout A and B 1/2 G • Cap on P2, T2 and N supplied MONOBLOC SPOOL VALVE 80L 1 x D/A DM081AM
Additional info MONOBLOC SPOOL VALVE - Type of control: Manual - Flow rate: 80lpm - Pressure relief valve: adjustable from 50 to 250bar - Number of sections: 2 - Type of sections: A (Double-acting spool valve A and B closed) - Ports: 1/2" BSP (supply, carry over and reservoir return) ---------- 3/8" BSP (receiver supply) - Configuration: Open centre, closed center or carry over --------------------- Blank plug and spacer provided MONOBLOC SPOOL VALVE DM081A2M
Additional info Hydraulic spool valve. Monoblock manual control. - Max flow 80 lpm. - 3 functions double acting. - Max pressure 250 bar. - Pressure relief regulated from 50 bar to 250 bar. - Port connection (P) 1/2" BSP. - Port connection (T) 3/4" BSP. - Port connections A & B 1/2" BSP. - Blanking plugs for P2 & T2 provided. - Carry over plug for N port provided. SPOOL VALVE 80 LPM 3 D/A DM081A3M
Additional info Monobloc hydraulic distributor with manual control• Maximum flow 80 L/min• 4 double acting functions• Maximum pressure 250 Bar• Adjustable pressure limiter from 50 to 250 Bar• Pressure implantation in 1/2 G• Return installation in 3/4 G• Layout A and B 1/2 G• Plug on P2, T2 and N supplied MONO SPOOL VALVE 4 D/A DM081A4M
Additional info Monobloc hydraulic valve with manual control • Maximum flow 80 L / min • 6 double acting functions • Maximum pressure 250 Bar • Pressure relief valve adjustable from 50 to 250 Bar • Pressure implantation in 1/2 G • 3/4 G return layout • Layout A and B 1/2 G • Cap on P2, T2 and N supplied MONOBLOCK 80 LPM 6 SECTION DM081A6M
Additional info Monobloc hydraulic valve with manual control • Maximum flow 80 L / min • 2 double acting functions • 1 double-acting function A and B to T in neutral notched to push • Maximum pressure 250 Bar • Pressure relief valve adjustable from 50 to 250 Bar • Pressure implantation in 1/2 G • 3/4 G return layout • Layout A and B 1/2 G • Cap on P2, T2 and N supplied MONOBLOCK 80 LPM 3 SECTION DM081A2CXM
Additional info Monobloc hydraulic valve with manual control • Maximum flow 80 L / min • 3 double-acting functions • 1 double-acting function A and B to T in neutral • Maximum pressure 250 Bar • Pressure relief valve adjustable from 50 to 250 Bar • Pressure implantation in 1/2 G • 3/4 G return layout • Layout A and B 1/2 G • Cap on P2, T2 and N supplied MONO SPOOL VALVE 80 LPM 4 SECTION DM081A3CM
Additional info Spool valve 80 lpm Single section motor spool (A & B to T) Lever detented when pulled. SPOOL VALVE SINGLE SECTION DM081CVM