Engine stop Eco-Stop
Save fuel easily
The engine is idling and your driver is away, Hydrokit has the solution to automate the shutdown of the combustion engine when the machine is not in use.
- Profitability assured with the reduction of the number of operating hours: for a mini-excavator working 600 hours per year, of which 40% of the time is at idle, this represents a saving of 1200 operating hours after 5 years
- Lower consumption and pollution
- Secure system in case of cut wires, box out of order: the engine does not shut down
- Alarm at the beginning of the cut and information during the stop
- Reducing operating costs: saving fuel and maintenance cost (oil change, servicing, etc.)
- Increased resale value
- Increase in the life of the machine
- Environmental protection: Against noise pollution and Against pollution
Operation and features
This module allows the motor to be stopped as soon as the defined parameters are obtained:
-
Driver not in the cockpit or other information
-
Engine idling or machine not in use
Technical specifications
-
2 inputs are taken into account before stopping: the engine speed and the non-presence of the driver (stick up, handbrake, etc.) depending on the machine.
-
Time delay adjustable from 1 to 10 minutes.
-
Alarm beep at the beginning of the time delay and before the engine stops.
-
This application is adaptable to different machines depending on the model.
