Distributeur Monobloc Manuel 45L - 2 éléments
Référence Hydrokit : DMO045B2M
Informations techniques
Caractéristiques :
Adaptable sur circuit ouvert ou centre à suivre
Débit maxi : 45L/min
Pression maxi : 315 bar
Pression max réglable : 50 à 200 bar
Contrepression max sur T : 25 bar
Température d'huile conseillée : de -20° à +80°C
Température ambiante : -40° à +60°C
Orifices P, C, T, A et B 3/8' BSP
2 éléments, tiroir simple effet
E = 137.5 mm // F = 110 mm
Adaptable sur circuit ouvert ou centre à suivre
Débit maxi : 45L/min
Pression maxi : 315 bar
Pression max réglable : 50 à 200 bar
Contrepression max sur T : 25 bar
Température d'huile conseillée : de -20° à +80°C
Température ambiante : -40° à +60°C
Orifices P, C, T, A et B 3/8' BSP
2 éléments, tiroir simple effet
E = 137.5 mm // F = 110 mm
Pression max. |
Tiroir simple effet |
Tiroir double effet | ||
A et B fermé |
A et B vers T |
Position flottante | ||
Type B |
Type A |
Type C |
Type D | |
315 | 2 | - | - | - |
Caractéristiques techniques
Type de circuit hydraulique | CO & CS - Circuit ouvert et centre à suivre | ||
Débit maxi | 45 | l/min | |
Pression maxi d'utilisation | 315 | bar | |
Nombre de section(s) | 2 | ||
Type(s) Tiroir(s) | 1SE | ||
Type(s) de commande(s) | Commande Manuelle | ||
Implantation orifice P | G3/8 | ||
Implantation orifices A&B et/ou R | G3/8 | ||
Implantation orifice T | G3/8 | ||
Implantation orifice CS | G3/8 | ||
Implantation Pilotage A&B | sans |